|
Thermal imaging of your roof points out problems before they happen Water intrusion is the ultimate enemy of any roof. Once water penetrates a flat roof, it is not likely to dry naturally. When moisture levels exceed 19% for 48 hours mold and rot begin to consume building materials. These fungi will continue to grow until the moisture level drops below 19%. Most leaks in flat roofs can be discovered by thermal imaging before extensive damage happens. Thermal imaging uses the temperatures on a surface to create an image. Thermal cameras detect slight variations in surface temperatures. Different building materials hold and release heat at different rates. Wet building materials hold and release heat slower than dry building materials. The various temperatures of different materials, wet and dry, transfer to the surface. Under the proper conditions, surface temperatures can reveal what is inside roofs and walls using thermal imaging. A building’s roof is its first line of defense against weather and its aging affects. The roof is probably the biggest single item replacement expense that you will have if you own any building long enough. Regular inspection and maintenance pays. The better the roof is maintained the longer it will last and the less it will cost to replace at the end of its useful life. At Sielfleisch Roofing we provide our clients a free bi-annual thermal imaging roof scan with all of our annual Maintenance Contracts.
|
|
Thermal imaging
|



